Optonic

Application

Semiconductor Laser Marking Projector

He-Ne Gas Laser

Light Marking Projector

LED Marking Projector

Laser Auto Marking

Laser Auto Marking System

LAMS18 T series is the laser auto marking system which adopts a semiconductor laser or helium-Ne gas laser as the source of luminescence, and comes to carry AC servo motor in the source of a drive. By the input of position data, the laser beam on the bed arranged at right and left can be moved freely, and can perform high precision.
Model
LAMS18T
-0400-L
LAMS18T
-1000-L
LAMS18T
-1200-L
LAMS18T
-1600-L
Projection Distance and Pattern Dimension
Projection Distance at 1200mm, Line Length 600mm, Line Width 0.8mm
Mooving Range
Min.40mm~
Max.400mm
Min.40mm~
Max.1000mm
Min.40mm~
Max.1200mm
Min.40mm~
Max.1600mm
Moving Speed
300mm/sec.
Operating Method
Controller
Drive System
Timing Belt System, AC Servo Motor - 100W
Servo Amp. (Built-in Controllelr)
Power Supply
Laser Beam - AC100V 50/60Hz
Controller - AC200V 0/60Hz

Model
LAMS23-400LDSF
LAMS23-800LDSF
LAMS23-1000LDSF
Projection Distance and Pattern Dimension
at 1000mm, Line Length 600mm, Line Width approx.0.8mm
Mooving Range
Min.40mm~ Max.400mm
Min.40mm~ Max.800mm
Min.40mm~ Max.1000mm
Mooving Speed
100mm/sec(Max.300mm/sec)
Operating Method
Controller
Stop Position
Arbitary Setup/±0.5mm
Min. Setting Unit/Drive System
0.2mm/pulse, Timing Belt System, Stepping Motor (two)
Motor Supply/Operating Temperature
DC24V 5A/0°C~50°C
home | about us | contact | sitemap 

Copyright © Alstron (Singapore) Pte Ltd 2013