Progressive Shutter Camera
- FC2000
- FC1500
- FC1500F
- FC320/820
- FC320R/820R
- FC300M
- FC300F
- FC1500CL/1500PCL
- FC820CL/320CL
- FC Tool (Serial Communication Control Software)
Progressive Shutter Color Camera

Black and White Video Camera

Color Video Camera

Line Sensor Camera

Power Source Equipment

Monitor

Image Controller & Inspection Equipment

FC300F

Camera having capability with all pixel double speed and partial scanning quadruple speed

Dimentional outline drawing Click here for dimensional outline drawing.
I/F board Click here for connection list for connection with I/F board.
FC300F

Overview

FC300F is white and black progressive scanning progressive shutter video camera used 0.33-million pixel CCD in 1/3-inch optical system.
Employing square grid arrays of fault free pixel CCD image pick up devices that perform interline transfer, these cameras are suitable as sensors for high resolution measurements. pattern inspection and character reading.
Internal circuits of the cameras perform digital processing with the built-in CPU, enabling personal computers to control them easily through a capture board
Waveform correction of video signals is controllable remotely through RS-232C, making it possible to use the cameras under optimum conditions as required by each application.

Features

Sensitivity under near infrared region of the spectrum is improved and smear at high speed shuttering is reduced comparing with conventional camera as new designed interline transferring CCD is adopted.
Video output can respond to either progressive scanning (non-interlace scanning) output or 2:1 interlace scanning output because field memory is equipped.
Static image by electronic shutter is continuously obtained through random resetting by only inputting of external trigger into camera.
Video output signal is outputted as analogue and digitized signal.
1. Progressive scanning analogue video signal (BNC)
2. Progressive scanning digital video signal
   8 bit, RS-422 output (36-pin connector)
   (option: RS-644 output)
Such changeover operations as setting of electronic shutter speed and shutter mode (usual/random), etc. are all executed at back plane of camera.

Applications

Spectral sensitivity
characteristic

Barcode reading
Various inspection, measuring, and readout of character at high speed on-line processing
High definition readout of drawing
Sensor for high speed monitoring

Specifications

Image pick-up
device
Progressive scanning, interline transfer CCD
1/3"size (aspect ratio 4:3)
0.33 million pixels
659 (H) × 494(V)
Load scanning fH = 31.47KHz
fV = 60 Hz
FCLK = 24.55 MHz
External
synchronization
External synchronization is possible (Automatic switching) Input HD only during operation on the random shutter mode.
EXT.HD = 31.47 kHz
EXT.VD = 60 Hz
Horizontal
resolution
More than 450 (TV) lines
Vertical resolution More than 480 (TV) lines
Sensitivity 100LX F4
Min. luminance on objects 0.5LX F1.4
(without infrared cutoff filter)
S/N More than 50dB (AGC = OFF)
Video output signal Non-interlaced: 60 frames/sec.
Digital output: 8 bits RS-422 differential output 100 Ω load
Analog output: 1Vpp 75 Ω unbalanced
Gamma 1/0.45 switchable (Analog signal only set at 1 in factory shipment.)
Electronic shutter Selectable from 1/120000 to 1/30 sec. and to time exposure.
1/20000 - 1/30 sec. time exposure
RS232C possible
Lens mount C type mount
Power requirement DC 12V ± 10%
Max. 250mA (in analog output only)
Max. 400mA (in both analog & digital outputs)
Operating ambient
temperature
0ºC to 40ºC (There should be no dew formed nor freezing.)
Storage range -30ºC to 60ºC
(There should be no dew formed nor temperature freezing.)
Impact resistance 70 G
Vibration proof 7G (11 to 200 Hz)
Outside dimensions 46 (W) × 49 (H) × 120 (L) mm
(excluding connectors)
Weight Approx. 300 g
home | about us | contact | sitemap 

Copyright © Alstron (Singapore) Pte Ltd 2013