Progressive Shutter Camera
- FC2000
- FC1500
- FC1500F
- FC320/820
- FC320R/820R
- FC300M
- FC300F
- FC1500CL/1500PCL
- FC820CL/320CL
- FC Tool (Serial Communication Control Software)
Progressive Shutter Color Camera

Black and White Video Camera

Color Video Camera

Line Sensor Camera

Power Source Equipment


Image Controller & Inspection Equipment

(30 frames/sec)
(15 frames/sec)

Digital camera having communication capability with internally synchronized with provided RS-232C
Progressive Scan Camera

Dimentional outline drawing Click here for dimensional outline drawing.
I/F board Click here for connection list for connection with I/F board.
Detailed catalogue Click here for detailed catalogue.


Internal set values in camera can be controlled externally using communication through RS-232C.
Image can be obtained with electronic shutter only inputting external trigger into camera to asynchronous reset.
(asynchronous shutter mode)
Video output signal is outputted by digitized signal.
Progressive scan?10 bit parallel digitized video signals are outputted through digital output connector (36 pins).
Video signal is outputted in progressive scan (non-interlace scan).
TAKEX FC Series cameras adopt new designed CCD interline transfer method therefore smear at high-speed shutter is remarkably reduced comparing with conventional camera.
Small sized and light in weight as well as low cost are realized by special design dedicated to digitized signal output.


Vertical resolution is not lowered under electronic shutter operation because full pixels independent read is implemented by using progressive scanning.
“Base Configuration” of Camera Link is adopted and black-and-white 10bit gradation of digital video signal is outputted.
Full pixels read scanning under 15~30 frame/sec. (Differs depend on type.) without mechanical shutter and random shutter is also possible because electronic shutter function is equipped.
Full frame continuous electronics shutter and random shutter exposure can be variable in 8 steps exposure time from 1/10000
sec. (maximum speed) at fixed length and pulse width and long time exposure setting is also possible.
In long time exposure mode, exposure time can be set variable from two-frame time in frame unit. (Differs depend on type.)
In random shutter mode, release timing (strobe trigger signal) of electronic shutter is outputted from 12pin camera connector.
Double-speed reading using vertical two pixels mixed read is possible at continuous shutter. (Excluding FC320R)
Three memories composed of various operation-setting parameters can be saved using backup memory (EEPROM).
High sensitivity and low smear.


Spectral sensitivity

Inputting apparatus for image processing device provided high resolution electronic shutter
High density bar code information reader
Driving car number reader
Defect detector for LCD and plasma display
Microscope and telescope usage
Microscope usage
Miscellaneous overall devices required image processing connecting to computer


Items / Camera model FC320R FC820R
Image pick-up
Progressive scanning, interline transfer CCD
1/3" size
(aspect ratio 4:3)
1/2" size
(aspect ratio 4:3)
0.33 million pixels
659(H) × 494(V)
0.88 million pixels
1034(H) × 779(V)
Load scanning fH = 15.73KHz
fV = 30 Hz
FCLK = 12.27 MHz
fH = 12.0KHz
fV = 15 Hz
FCLK = 14.318 MHz
Sensitivity 100 LX F11 100 LX F11
Min. luminance on objects 1 LX F1.4 1LX F1.4
(without infrared cutoff filter)
S/N More than 50dB (AGC = OFF)
Video output signal Non-interlaced: 30 frames/sec. Non-interlaced: 15 frames/sec.
Digital output : 10bits RS-422 differential output 100 Ω load
Gamma γ = 1 fixed (0.45 is optionally provided)
Electronic shutter 1/10000 - 1/30 sec - time exposure 1/10000 - 1/15 sec.- time exposure
Continuous shutter, asynchronous shutter, and long time exposing mode change are possible.
RS-232C Communication is possible.
Lens mount C type mount
Power requirement DC 12V ± 10%
Max. 380mA Max. 450mA
Operating ambient
0ºC to 40ºC (There should be no dew formed nor freezing.)
Storage range -30ºC to 60ºC
Impact resistance 70 G
Vibration proof 7G (11 to 200Hz)
Outside dimensions 46 (W) × 49 (H) × 120 (L) mm (excluding connector)
Weight Approx. 300 g
home | about us | contact | sitemap 

Copyright © Alstron (Singapore) Pte Ltd 2013