Progressive Shutter Camera
- FC2000
- FC1500
- FC1500F
- FC320/820
- FC320R/820R
- FC300M
- FC300F
- FC1500CL/1500PCL
- FC820CL/320CL
- FC Tool (Serial Communication Control Software)
Progressive Shutter Color Camera

Black and White Video Camera

Color Video Camera

Line Sensor Camera

Power Source Equipment

Monitor

Image Controller & Inspection Equipment

FC320CL
(30 frames/sec)
FC820CL
(15 frames/sec)

Camera link ready 0.8-million / 0.33- million pixel
Progressive Scan Camera

Dimentional outline drawing Click here for dimensional outline drawing.
Detailed catalogue Click here for detailed catalogue.
FC320CL

Overview

This camera is complied with Camera Link that is the Standard of Digital Camera Interface for new industrial use.
Connectable any of globally famous frame grabber maker’s product that is complied with Camera Link Standard.
Video output is outputted in progressive scanning (non-interlace scanning).
Low cost is realized by adopting digital output and dedicated self-synchronization.
Customer’s developed software properties can be utilized because new series have compatibility with conventional FC820 / FC320.
Such various shutter operations as continuous shutter mode and random shutter mode, etc. are available similar with conventional type.

Vertical resolution is not lowered under electronic shutter operation because full pixels independent read is implemented by using progressive scanning.
“Base Configuration” of Camera Link is adopted and black-and-white 10bit gradation of digital video signal is outputted.
Full pixels read scanning under 12~30 frame/sec. (Differs depend on type.) without mechanical shutter and random shutter is also possible because electronic shutter function is equipped.
Full frame continuous electronics shutter and random shutter exposure can be variable in 8 steps exposure time from 1/10000
sec. (maximum speed) at fixed length and pulse width and long time exposure setting is also possible.
In long time exposure mode, exposure time can be set variable from two-frame time in frame unit. (Differs depend on type.)
Release timing signal (stroboscope trigger signal) is outputted from 12-pin camera connector in random shutter mode.
Double-speed reading using vertical two pixels mixed read is possible at continuous shutter. (Excluding FC320CL)
Three memories composed of various operation-setting parameters can be saved using backup memory (EEPROM).
More detailed set up is possible through communication using personal computer because serial communication interface (SerTC and SerTFG) of Camera Link Connector is supported as standard. *1
Low electric energy consuming product, which is about 60% comparing with conventional one.
High sensitivity and low smear.
  *1 : Function of Serial Communication Interface is required hardware and software support at frame grabber side.

Applications

Inputting apparatus for image processing device provided high resolution electronic shutter
High density bar code information reader
Driving car number reader
Defect detector for LCD and plasma display
Microscope and telescope usage
Miscellaneous overall devices required image processing connecting to computer

Specifications

Items / Camera model FC320CL FC820CL
Image pick-up
device
Progressive scanning, interline transfer CCD
1/3" size
(aspect ratio 4:3)
1/2" size
(aspect ratio 4:3)
0.33 million pixels
659(H) × 494(V)
0.88 million pixels
1034(H) × 779(V)
Load scanning fH = 15.73KHz
fV = 30 Hz
FCLK = 12.27 MHz
fH = 12.0KHz
fV = 15 Hz
FCLK = 14.318 MHz
Sensitivity 100 LX F11 100 LX F11
Min. luminance on objects 1 LX F1.4 1LX F1.4
(without infrared cutoff filter)
S/N More than 50dB (AGC = OFF)
Video output signal Non-interlaced: 30 frames/sec. Non-interlaced: 15 frames/sec.
Digital output : 10bits RS-422 differential output 100 Ω load
Gamma 1
Electronic shutter 1/10000 - 1/30 sec - time exposure 1/10000 - 1/15 sec.- time exposure
Communication control URAT embedded, start stop synchronization method 9600bps through camera link
(RS232C level input-output to camera connector is optionally possible.)
Lens mount C type mount
Power requirement DC 12V ± 10%
Max. 380mA Max. 450mA
Operating ambient
temperature
0ºC to 40ºC (There should be no dew formed nor freezing.)
Storage range -30ºC to 60ºC (There should be no dew formed nor temperature freezing.)
Impact resistance 70 G
Vibration proof 7G (11 to 200Hz)
Outside dimensions 46 (W) × 49 (H) × 120 (L) mm (excluding connectors)
Weight Approx. 300 g
home | about us | contact | sitemap 

Copyright © Alstron (Singapore) Pte Ltd 2013